Motore pompa pneumatico
Ratio 32:1 – 7,5 l.p.m.
application: low and medium viscosity products
use: pressure supply
PRESTAZIONI:
| Air Inlet Pressure Range | 2- 6 bar |
| Ratio | 32:1 B |
| Max Rec’d Cycles / Minute | 28 |
| Displacement Per Cycle | 270 cc |
| Flow @ 70 Cycles / Minute | 7,5 l.p.m. |
| Air consumption @ 6 bar | 2000 N.l.p.m. |
SPECIFICHE:
| Lower Pump Material | Stainless Steel |
| Pumping stem material | 316 Stainless Steel Hard Chrome opt. 316 SS High Density Ceramic Coated |
| Cylinder Material | 316 L Stainless Steel |
| Seal set | Teflon/Carbographite spec. compound |
| Valves ball material | 420 SS – opt. Tungsten Carbide |
| Valves seat material | Tungsten Carbide |
| Air Motor | 962 |
| Motor Diameter | 200 mm |
| Stroke | 150 mm |
| Air Inlet | G 3/8″ (F) |
| Material Inlet | G 1 1/2″ (M) |
| Material Outlet | G 3/8″ (M) |
| Weight | 35 kgs |
ACCESSORI:
| Air FR+L | 3822-CA |
| Mounting brackets | 828025 |
| Delivery filters | 198500 |
| Suction filters | 196800, 193100, 785 |
Motore pompa pneumatico
Ratio 32:1 – 7,5 l.p.m.
application: low and medium viscosity products
use: pressure supply
PRESTAZIONI:
| Air Inlet Pressure Range | 2- 6 bar |
| Ratio | 32:1 B |
| Max Rec’d Cycles / Minute | 28 |
| Displacement Per Cycle | 270 cc |
| Flow @ 70 Cycles / Minute | 7,5 l.p.m. |
| Air consumption @ 6 bar | 2000 N.l.p.m. |
SPECIFICHE:
| Lower Pump Material | Stainless Steel |
| Pumping stem material | 316 Stainless Steel Hard Chrome opt. 316 SS High Density Ceramic Coated |
| Cylinder Material | 316 L Stainless Steel |
| Seal set | Teflon/Carbographite spec. compound |
| Valves ball material | 420 SS – opt. Tungsten Carbide |
| Valves seat material | Tungsten Carbide |
| Air Motor | 962 |
| Motor Diameter | 200 mm |
| Stroke | 150 mm |
| Air Inlet | G 3/8″ (F) |
| Material Inlet | G 1 1/2″ (M) |
| Material Outlet | G 3/8″ (M) |
| Weight | 35 kgs |
ACCESSORI:
| Air FR+L | 3822-CA |
| Mounting brackets | 828025 |
| Delivery filters | 198500 |
| Suction filters | 196800, 193100, 785 |
Ratio 32:1 - 7,5 l.p.m.
application: low/medium viscosity products
use: pressure supply
| Air inlet pressure range: | 2 – 6 bar |
| Ratio: | 32:1 B |
| Max cycles / minute: | 28 |
| Displacement per cycle: | 270 cc |
| Flow @ 28 cycles / minute: | 7,5 l.p.m. |
| Air consumption @ 6 bar: | 2000 N.l.p.m. |
| Lower pump material: | Stainless Steel |
| Pumping stem material: | 316 Stainless Steel Hard Chrome – opt. 316 SS High Density Ceramic Coated |
| Cylinder material: | 316 L Stainless Steel |
| Seal set | Teflon/Carbographite special compound |
| Valves ball material: | 420 SS – Opt. Tungsten Carbide |
| Valves seat material: | Tungsten Carbide |
| Air motor: | 962 |
| Motor diameter | 200 mm |
| Stroke: | 150 mm |
| Air inlet: | G 3/8″ (F) |
| Material inlet: | G 1 1/2″ (M) |
| Material outlet: | G 3/8″ (M) |
| Weight: | 35 kgs |
| Air FR+L: | 3822-CA |
| Mounting bracket: | 828025 |
| Delivery filters: | 198500 |
| Suction filters: | 785, 196800,193100 |